2/Pack Uwell Caliburn G2 Replacement Pods in Abu Dhabi: Buy Refillable Empty Pods, Compatible with Caliburn G Coils
The Caliburn G2 pod system is built around a separable pod-and-coil format, the pod body is the refillable shell that lasts for months, and the coil is the replaceable element that changes every 1-2 weeks as it reaches end of life. Each empty Uwell Caliburn G2 Replacement pods in UAE accepts the full Caliburn G2 coil series via press-fit installation, includes a built-in airflow adjustment dial for personalised draw resistance, and features the sliding rubber stopper top-fill system for clean, fast refilling without removing the pod from the device. Available in 2 per pack at Vape Dubai King.
Key Features
- Empty Pod Shell, Coils Sold Separately: The Caliburn G2 replacement pod arrives without a coil installed. Purchase the Caliburn G & G2 coil variant (0.8Ω or 1.2Ω UN2 Meshed-H) separately from Vape Dubai King.
- Pro-FOCS Flavor Adjustment Technology: Uwell's proprietary flavor optimization system tuned to the UN2 Meshed-H coil's specific thermal profile ensures accurate e-liquid flavor reproduction from first draw to last throughout the coil's lifespan.
- Pod-Integrated Airflow Dial: The Caliburn G2 pod body has its own built-in airflow adjustment dial, set draw resistance per pod independently from the device.
- Top-Fill Sliding Stopper: Pull the rubber stopper on the top of the pod to expose the fill port, insert your bottle tip, fill to the 2ml line, reseat the stopper. The pod can be refilled without removing from the Caliburn G2 device.
- Transparent PCTG Body with E-Juice Window: Liquid level visible at any angle without pod removal. BPA-free, food-grade construction, chemically inert with all standard e-liquid compounds.
- Magnetic Connection: Secure snap-fit to the Caliburn G2 device, strong enough for active daily carry, clean and smooth to release when needed.
- Compatible with Caliburn G & G2 Coils: Genuine Uwell Caliburn G2 pod cartridges are compatible with Caliburn G & G2 coils.
Caliburn G2 Pod: Coil Compatibility
The Caliburn G2 empty pod accepts the Caliburn G & G2 UN2 Meshed-H coil series, available separately in 4-packs:
| Coil | Resistance | Wattage | Draw Style | Best For |
| UN2 Meshed-H 0.8Ω | 0.8Ω | 13-18W | Warm MTL | 20-35mg nic salt / 50/50 freebase |
| UN2 Meshed-H 1.2Ω | 1.2Ω | 9-13W | Tight MTL | 35-50mg nic salt |
0.8Ω: A warmer, slightly more open MTL draw with more vapor density than the 1.2Ω. The most versatile Caliburn G2 coil, suits the majority of daily nic salt vapers.
1.2Ω: The tightest draw in the Caliburn G2 system. Very low vapor volume, concentrated throat hit, the most cigarette-like experience the platform delivers and the most recommended coil for ex-smokers transitioning from cigarettes.
Compatible Devices
- Caliburn G2 Pod System
- Caliburn GK2 Pod System
- Caliburn GZ2 Pod System
When to Replace Your Caliburn G2 Pod Body?
The pod body lasts significantly longer than the coil, typically months of daily use before replacement is needed. Replace the pod body when:
- The PCTG body develops visible cracks, crazing, or persistent clouding that affects liquid level monitoring
- The magnetic base connection becomes weak, intermittent, or fails to seat reliably
- The sliding rubber stopper tears or no longer creates a leak-resistant seal
- Persistent flavor contamination remains after coil replacement and cleaning, indicating e-liquid residue has absorbed into the pod body material
If only the coil flavor has degraded, replace the coil only, not the pod body.
How to Set Up a New Caliburn G2 Pod
- Take the empty pod from the pack and install your chosen coil, push the UN2 Meshed-H coil firmly into the pod base until it press-fits with a click
- Prime the coil by adding 3-5 drops of e-liquid directly to the coil mesh before filling
- Pull the rubber stopper on top of the pod to expose the fill port
- Fill slowly to the 2ml line visible through the PCTG window
- Reseat the stopper firmly, press until flush with the pod top
- Wait 5 minutes for the coil to fully saturate before the first draw
- Snap the pod into the Caliburn G2 device magnetically
- Set airflow with the pod's built-in dial, tighter for more cigarette-like draw, more open for more vapor
- Draw naturally, the G2 activates via draw activation or button press
Keep Your Caliburn G2 Device Running at its Best
Two empty pod shells per pack. Top-fill sliding stopper. Pod-integrated airflow dial. Pro-FOCS flavor technology. Compatible with the full Caliburn G2 coil series. Press-fit coil installation, sold separately. Replace the pod body independently from the coil for the lowest ongoing cost. Stock up from Vape Dubai King and enjoy fast delivery across Dubai, Abu Dhabi, Sharjah, and anywhere across the UAE. We stock authentic Uwell products.
FAQs
Do these pods come with coils already installed?
No, the Caliburn G2 replacement pods are sold empty without coils. You need to purchase Caliburn G & G2 UN2 Meshed-H coils separately and press-fit them into the pod before use.
Can I use Caliburn G2 pods in my original Caliburn G device?
The Caliburn G2 pod body is not cross-compatible with the original Caliburn G device, they use different pod formats. The G2 pod is designed for the Caliburn G2, GK2, and GZ2 devices only.
How often should I replace the Caliburn G2 pod body versus the coil?
Replace the coil every 1-2 weeks when flavor degrades or a burnt taste develops. Replace the pod body only when it develops cracks, the magnetic connection weakens, or the fill stopper fails, typically after months of regular use. The pod body lasts significantly longer than the coil.
What is the difference between the 0.8Ω and 1.2Ω coil options for the G2 pod?
The 0.8Ω at 13-18W produces a warmer, more open MTL draw with more vapor, best for 20-35mg nic salts. The 1.2Ω at 9-13W is the tightest draw in the G2 system; very low vapor, concentrated throat hit, most cigarette-like, best for 35-50mg nic salts and ex-smokers.
Why does my Caliburn G2 pod taste burnt after just a few days?
Burnt taste in early pod life is most commonly caused by insufficient priming, always add a few drops of e-liquid directly to the coil and wait 5 minutes after filling before the first draw.
