Genuine Uwell Caliburn G & G2 Replacement Coils: The Coils That Keep the Caliburn Devices Running at its Best, 4 Per Pack
Uwell Caliburn G replacement coils series covers one of the broadest device compatibility ranges of any pod coil in the UAE market, the same coil body fits the Caliburn G, G2, GK2, GZ2, KOKO Prime, Caliburn TENET, Caliburn Explorer, and Caliburn Ironfist L. For vapers who have used any Caliburn G-series device, these coils are the continued supply line that keeps the system running at the flavor quality level that made the Caliburn range globally recognized.
For vapers having multiple Caliburn G-series devices, the single-coil-format compatibility across all variants means one coil stock covers every device in the family. Stock up today from Vape Dubai King. Each pack comes with the 4 coils of your chosen resistance.
Pro-FOCS Flavor Optimization Technology
Uwell’s Pro-FOCS technology is built to prioritize flavor accuracy by carefully matching the mesh structure, FeCrAl heating wire, and cotton wicking material. This combination helps the UN2 Meshed-H coil maintain a stable temperature throughout each draw, reducing hot spots and uneven heating. The result is clean, consistent flavor delivery that remains accurate from the first puff to the last, even as the coil ages.
Key Specs at a Glance
| Spec | Detail |
| Pack | 4 coils per pack |
| Material | FeCrAl mesh |
| Technology | Pro-FOCS |
| Installation | Press-fit |
| 0.8Ω | 13-18W, MTL/RDTL |
| 1.0Ω | 10-15W, tight MTL |
| 1.2Ω | 9-13W, tightest MTL |
| Compatible | Caliburn G series devices |
Uwell Caliburn G & G2 Coils: All Variants
0.8Ω UN2 Meshed-H (13-18W), Warm MTL with vapor:
The lowest resistance in the Uwell Caliburn G replacement coils range and the most versatile. At 13-18W, the 0.8Ω produces a warm, flavor-forward MTL draw with meaningful vapor volume, sitting between a tight MTL and a restricted direct-to-lung experience. Pairs best with 50/50 nicotine salt at 20-35mg. The most commonly purchased Caliburn G coil variant in the UAE market.
1.0Ω (10-15W), Focused Tight MTL:
A step tighter than the 0.8Ω, less vapor volume per draw, more concentrated flavor per puff, and a draw resistance that feels more restricted. Operating at 10-15W, this coil runs cooler than the 0.8Ω. Works well with nicotine salts at 35-50mg where the reduced vapor volume keeps the nicotine delivery smooth and measured.
1.2Ω UN2 Meshed-H (9-13W), Tightest MTL, Maximum Restriction:
The most cigarette-like coil in the entire Caliburn G range, the tightest draw, the lowest vapor volume, and the most concentrated nicotine delivery per puff from any coil the system offers. At 9-13W, the 1.2Ω runs at the lowest temperature of the three variants, which makes it the most nic-salt-compatible option for vapers using 50mg concentration throughout the day.
Pod and Device Compatibility
Compatible Pods:
- Uwell Caiburn G Pods
- Uwell Caiburn G2 Pods
- Uwell Caliburn X Pods
Compatible Devices:
- Caliburn G
- Caliburn G2
- Caliburn GK2
- Caliburn GZ2
- Caliburn KOKO Prime
- Caliburn GK2 Vision
- Caliburn TENET
- Caliburn Explorer
- Caliburn Ironfist L
How to Replace a Caliburn G Replacement Coil
- Remove the Caliburn G pod from the device by pulling it free from the magnetic connection
- Pull the spent coil free from the bottom of the pod, grip firmly and pull straight down
- Add 3-5 primer drops of your e-liquid directly onto the mesh of the new coil before installing
- Push the new coil firmly into the pod base until it clicks into place
- Fill the pod via the top-fill mouthpiece cap and allow 5 minutes to saturate
- Reattach the pod to the device and begin vaping at the lower end of the coil's wattage range
Uwell Caliburn G Coils Online in UAE
Four coils per pack. Three resistance options for every MTL preference. FeCrAl Meshed-H construction with Pro-FOCS flavor optimization. Compatible across the entire Caliburn G coil-series ecosystem. The coils that keep one of the UAE's most trusted pod platforms performing at its best. Order at Vape Dubai King for fast delivery across Dubai, Abu Dhabi, Sharjah, and anywhere across the UAE.
FAQs
Which Caliburn G coil resistance should I start with?
The 0.8Ω is the most universally recommended starting point, it delivers the best balance of flavor, vapor, and nicotine satisfaction across 20-35mg nic salts at 13-18W. Try the 1.0Ω if the 0.8Ω feels slightly too open, or the 1.2Ω if you are specifically an ex-smoker who wants the tightest possible draw.
How long does each Caliburn G coil last?
With correct priming and use within the rated wattage range, most users get 1-2 weeks per coil. Vapers who use non-sweetened e-liquids get closer to 2 weeks. Heavily sweetened e-liquids reduce this to 5-7 days.
Is the 1.2Ω coil compatible with the Caliburn G or only the G2?
The 1.2Ω Meshed-H coil is compatible with both the Caliburn G and G2 as well as all other devices in the Caliburn G coil-series compatibility list. It was introduced with the G2 but works in all G-series pod shells that accept the standard coil format.
Can I use these coils in a Caliburn A2 or Caliburn A3?
No, the Caliburn A-series uses a different pod and coil format to the Caliburn G-series. Always confirm your specific Caliburn device variant before purchasing coils.
Why does my coil taste burnt even when the pod is full?
This is most commonly caused by insufficient priming before the first draw. Always add 3-5 drops of e-liquid directly to the coil mesh before installing and wait 5 minutes after filling before vaping. Additionally, vaping above the coil's rated wattage or with very thick e-liquid can cause premature burnt taste.
