Genuine Uwell Caliburn A2 / A2S Replacement Pods in Umm Al Quwain, UAE: Two Pod Variants, One Device Platform
The Caliburn A2 and A2S are draw-activated slim pod systems; no buttons, no wattage menus, no settings. The Uwell Caliburn pod does all the work: the coil resistance determines the draw style, the fill system determines the refill experience, and Pro-FOCS flavor technology ensures every fill tastes as accurate as the e-liquid intended. The Uwell Caliburn A2 Replacement Pods (0.9Ω, top-fill) and the Uwell Caliburn A2S replacement pod (1.2Ω, side-fill) are cross-compatible with Caliburn A2, A2S, and AK2, giving Caliburn A-series users the choice between two genuinely different vaping characters from the same compact device.
Caliburn A2 Pod vs A2S Pod: Which to Buy?
- A2 Pod (0.9Ω, Top-Fill, Slightly Open MTL):
The 0.9Ω produces a warmer, slightly more open draw than the A2S pod, sitting between a tight MTL and an open MTL, slightly looser than a cigarette. The top-fill system requires removing the black mouthpiece cap entirely to access the fill port beneath. Vapers who want more vapor output than the A2S pod delivers and prefer a more open, less restricted draw should choose the A2 pod.
- A2S Pod (1.2Ω, Side-Fill, Tight MTL):
The 1.2Ω produces a tighter, more focused draw with lower vapor volume, closer to a genuine cigarette inhale. The side-fill system uses a silicone stopper on the pod body rather than requiring cap removal. The transparent pod body also makes liquid level monitoring easier from any angle. The A2S pod is consistently the preferred option for ex-smokers who want the most cigarette-like experience available in the Caliburn A-series platform.
Everything You Are Getting in Caliburn A2 & A2S Pods
- Pro-FOCS Flavor Technology: Uwell’s Pro-FOCS flavor system is optimized for the Meshed-H coil, delivering clean, accurate flavor reproduction with every puff. This proven technology is a key reason Caliburn pods are widely recognized for their consistent flavor performance.
- Improved Leak Resistance Over A1 Platform: The Caliburn A2 series redesigned pod sealing and magnetic base provide significantly better leak resistance during active daily carry.
- Cross-Compatible with A2, A2S, and AK2 Devices: Both pod variants work in all three Caliburn A-series devices.
- Transparent PCTG Body: Visible e-liquid level from any angle without pod removal.
- 4-Pod Pack: A practical month-or-more supply for moderate daily vapers, four pods at typical 1-2 week lifespan per pod provides a full replenishment cycle in a single purchase.
Key Specifications
| Spec | A2 Pod | A2S Pod |
| Resistance | 0.9Ω | 1.2Ω |
| Fill System | Top-fill (cap removal) | Side-fill (silicone stopper) |
| Wattage | 15W | 15W |
| Draw Style | Slightly open MTL | Tight MTL |
| Capacity | 2ml | 2ml |
| Pack | 4 pods | 4 pods |
| Compatible | A2, A2S, AK2 | A2, A2S, AK2 |
Compatible E-Liquids
A2 Pod (0.9Ω): 50/50 VG/PG nicotine salt at 20-35mg. The slightly open MTL draw makes 20-35mg the most comfortable concentration range for most daily vapers.
A2S Pod (1.2Ω): 50/50 VG/PG nicotine salt at 35-50mg. The tight MTL draw and low vapor volume are specifically suited to maximum-strength nicotine salt delivery for ex-smokers.
Device Compatibility
- Caliburn A2 pod kit
- Caliburn A2S pod kit
- Caliburn AK2 pod kit
How to Fill Each Uwell Caliburn Pods
A2 Pod (Top-Fill):
- Pull the black mouthpiece cap completely off the top of the pod
- Insert your bottle tip into the fill port beneath and fill to the 2ml line
- Replace the mouthpiece cap firmly
A2S Pod (Side-Fill):
- Locate the silicone stopper on the side of the transparent pod body
- Pull the stopper open with a fingernail
- Insert your bottle tip and fill to the visible 2ml line
- Press the stopper firmly back into its sealed position
For both pod types: wait 5 minutes after filling before the first draw to allow the UN2 mesh coil to fully saturate.
Conclusion
4 pods per pack. Choose A2 (0.9Ω, top-fill, open MTL) or A2S (1.2Ω, side-fill, tight MTL). Both cross-compatible with Caliburn A2, A2S, and AK2. Pro-FOCS flavor technology. Improved leak resistance. Transparent PCTG body. Order at Vape Dubai King for fast delivery across every emirate of the UAE. We only stock authentic Uwell devices, sourced through verified distribution channels. No imitation, no grey market stock.
FAQs
What is the key difference between the A2 pod and the A2S pod?
The A2 pod is 0.9Ω with a top-fill system and a slightly open MTL draw at 20-35mg nic salt. The A2S pod is 1.2Ω with a side-fill silicone stopper and a tighter, more cigarette-like MTL draw at 35-50mg nic salt.
Can I use A2 pods in my A2S device and vice versa?
Yes, both pod variants are cross-compatible with the Caliburn A2, A2S, and AK2 devices. You can use the 1.2Ω A2S pod in an A2 device, or the 0.9Ω A2 pod in an A2S device, both work correctly.
Which Uwell Caliburn A2 Replacement Pods is better for ex-smokers?
The A2S pod (1.2Ω, tight MTL) most closely replicates a cigarette draw; lower vapor, concentrated throat hit, specifically suited to 50mg nicotine salts. The A2 pod (0.9Ω) is better for vapers who want more vapor than a cigarette provides.
Why does my new A2/A2S pod taste of cotton on the first few draws?
Most pod systems require a break-in period on the first fill; add e-liquid, wait 5 minutes for full saturation, and take 2-3 gentle draws before vaping at full draw speed.
Are these pods compatible with the original Caliburn A1?
No, the Caliburn A2 and A2S pods are specifically designed for the A2/A2S/AK2 platform. The original Caliburn uses a completely different pod format and these pods are not interchangeable.
