Shop Voopoo UForce U2 Replacement Coils in UAE: Different Variants, One Platform, Complete Sub-Ohm Coverage
The UForce replacement coils range is built around a specific engineering principle: bottom vertical coil architecture for maximum wicking consistency and nine variants have been developed within that structure to cover every wattage range and vapor production preference from 24W gentle mesh draws to 130W octuple-core cloud output. Whether you are running a Drag 2 at 80W for everyday sub-ohm vaping or pushing a Voopoo TOO kit to 120W for maximum performance, there is a Voopoo UForce coil variant built for exactly that use case.
Bottom Vertical OCC Architecture: The Foundation of the UForce Platform
All UForce replacement coil variants share the same fundamental design principle: the coil sits vertically at the base of the tank and wicks e-liquid upward from below. Unlike horizontal designs where liquid must wick sideways against gravity, creating dry spots when the tank runs low or during rapid consecutive draws, the UForce's bottom vertical structure uses gravity to maintain continuous e-liquid supply to the wicking ports throughout every session.
Multiple juice holes distributed around each coil body ensure even saturation across all wicking surfaces simultaneously, preventing the dry pockets that cause harsh hits and shorten coil life in horizontal alternatives.
Everything You Are Getting
- 5 Coils Per Pack: Multiple weeks of use depending on vaping frequency and wattage
- Multiple Variants Available: U2, U4, D4, U6, U8, N1, N2, N3, P2, full platform range
- Bottom Vertical OCC Structure: Gravity-fed wicking, consistent saturation at any fill level
- Dual to Octuple Core Options: Scale vapor density and cloud output by core count
- Mesh Variants Available: N1, N2, N3, P2, faster heat-up and more even temperature
- 24-130W Total Range: Covers every wattage from low-output single 18650 to flagship dual setups
- Multiple Juice Holes: Even wicking across all cotton ports, prevents dry spots and channel burning
- Organic Cotton Wicking: Pure, neutral flavor, no off-taste across any variant
- Stainless Steel Housing: Resistance specs and wattage range printed directly on coil exterior
- Gold-Plated Connection: Corrosion-resistant, maintains stable electrical contact throughout coil life
- Anti-Leak + Anti-Spitting Design: Engineered alongside the UForce tank's enclosed base
- Heat Insulation: Prevents external heat transfer during extended high-wattage sessions
- Genuine Voopoo: Original manufacturer coils, accurate resistance specs guaranteed
Voopoo UForce Replacement Coil Variants
| Variant | Resistance | Wattage | Sweet Spot | Core Construction | Style |
| U2 | 0.4Ω | 40-80W | 55-65W | Dual wire OCC | DTL mid-wattage |
| U4 | 0.23Ω | 50-120W | 60-80W | Quadruple wire OCC | DTL higher output |
| D4 | 0.4Ω | 50-90W | 65-75W | Quadruple wire OCC | DTL quad at mid-wattage |
| U6 | 0.15Ω | 65-110W | 80-90W | Sextuple wire OCC | DTL high output |
| U8 | 0.15Ω | 70-130W | 90-110W | Octuple wire OCC | DTL maximum output |
| N1 | 0.13Ω | 50-100W | 65-85W | Single mesh | DTL mesh high output |
| N2 | 0.3Ω | 45-80W | 55-65W | Dual mesh | DTL mesh mid-wattage |
| N3 | 0.2Ω | 65-100W | 75-85W | Triple mesh | DTL mesh high output |
| P2 | 0.6Ω | 24-28W | 24-28W | Single mesh | DTL low-wattage entry |
How to Buy the Right UForce Variant in Dubai?
U2 (0.4Ω / 55-65W sweet spot): the most popular and accessible entry point. Dual wire OCC produces excellent flavor and vapor at the mid-wattage range that most dual 18650 mods operate at comfortably. The best starting coil for new UForce platform users.
U4 (0.23Ω / 60-80W sweet spot): a step up from the UForce U2 coil with four wire elements. More vapor density and richer flavor at higher wattage without requiring the 80W+ of the U6 and above. The natural upgrade from the U2 for vapers who want more.
D4 (0.4Ω / 65-75W sweet spot): four wire elements at 0.4Ω resistance. Delivers the flavor density of a quad-core at a more accessible wattage than the U4, sitting between the U2 and U4 in output character.
U6 (0.15Ω / 80-90W sweet spot): six wire elements for serious cloud production at high wattage. Requires a device capable of sustained 80W+ output. Dense, warm vapor with strong flavor saturation.
U8 (0.15Ω / 90-110W sweet spot): the flagship. Eight individual wire elements simultaneously firing produce the most intense vapor density the UForce platform can deliver. For committed cloud vapers running 100W+ capable devices.
N2 (0.3Ω / 55-65W sweet spot): dual mesh at the mid-wattage range. Produces faster heat-up, more even temperature distribution, and richer flavor accuracy than the U2 at equivalent wattage. The best option for vapers who prioritize flavor over maximum cloud output.
N3 (0.2Ω / 75-85W sweet spot): triple mesh at higher wattage. Bridges the gap between the N2's flavor precision and the U-series' vapor density. Three mesh elements deliver the most complete mesh performance in the UForce range.
P2 (0.6Ω / 24-28W): a single mesh coil running at just 24-28W, making it compatible with lower-powered single 18650 devices that can't sustain higher output. Entry-level mesh flavor at a wattage most pod mods can comfortably reach.
Device and Pod Compatibility
- Voopoo UForce Tank
- Voopoo UForce T1 Tank
- Voopoo UForce T2 Tank
- Voopoo Drag 2 Kit 177W
- Voopoo Drag Mini Kit 117W
- Voopoo TOO Kit 180W
- Voopoo TOO Resin Kit 180W
- Voopoo Caliber Kit 110W
- Voopoo VMATE Kit 200W
- Voopoo BLACK DRAG Kit 157W
- Voopoo MOJO Kit 88W
Critical note: The UForce coils are not compatible with the UFORCE-X Tank (included with the Drag 5 Kit). Always confirm your specific tank model before ordering, the UFORCE-X uses the PnP X coil platform exclusively.
How to Prime and Install UForce Coils
- Remove the UForce tank from the device and separate the base section by unscrewing it
- Unscrew the old coil counter-clockwise from the base
- Add 4-5 drops of e-liquid directly into the juice holes on the new coil
- Wait 3 minutes for the cotton to partially absorb before proceeding
- Thread the new coil clockwise into the tank base until hand-tight, do not overtighten
- Fill the tank with your preferred high-VG e-liquid via the top-fill port
- Reassemble the tank and reattach to the device
- Wait an additional 5 minutes before your first draw
- Begin vaping at the lower end of the recommended wattage range and increase gradually to your preference
The Sub-Ohm Coil Range Built to Last
The UForce coil series has proven its durability across years of real-world use in the Dubai market; bottom vertical wicking, consistent coil life, and multiple variants that give every UForce tank user exactly the output level they need. From the accessible U2 at 60W to the flagship U8 at 100W+, the full range is stocked on Vape Dubai King. Order yours today with fast delivery anywhere across the UAE.
Frequently Asked Questions
What is the difference between U2 and N2 coils?
The U2 uses dual parallel Kanthal wire elements in a traditional OCC construction, producing a warmer, more direct draw character. The N2 uses dual mesh, faster heat-up, more even temperature distribution, and richer flavor per draw. Both operate in the same 45-80W range.
Which UForce coil should I choose for a 100W+ device?
The U8 (0.15Ω, 70-130W) is the recommended option for high-wattage 100W+ setups. The U6 (0.15Ω, 65-110W) is a slightly less intense alternative if you prefer the sweet spot below 100W.
Are UForce coils compatible with the Drag 5 UFORCE-X Tank?
No, the Drag 5's UFORCE-X Tank uses PnP X coils exclusively. Standard UForce coils are not compatible with any device in the PnP or PnP X platform lineup. This is because the coil base design and airflow system is fully different between UForce and PnP X platforms.
How long does a UForce U2 coil typically last?
Regular users report 2-4 weeks per coil at 55-65W with standard high-VG e-liquid. Heavily sweetened e-liquids shorten this toward 1-2 weeks. Proper priming before first use can significantly extend coil lifespan and maintain flavor consistency.
Where can I buy Voopoo UForce Replacement Coils in Sharjah?
UForce replacement coils are available at Vape Dubai King in all variants with fast same-day and next-day delivery across Dubai, Abu Dhabi, Sharjah, and all other UAE emirates. Orders placed in the working hours are dispatched the same day for faster delivery.
