Vaporesso GTi Coil for iTank 5pcs/Pack

Shop 5/Pack Vaporesso GTi Coils in Abu Dhabi and Sharjah: The Sub-Ohm Mesh Coils for Vaporesso's DTL Tank Lineup

The Vaporesso GTi replacement coil series is Vaporesso's dedicated high-wattage coil platform built exclusively for the iTank family and the Armour, GEN, and Target mod kit series that pair with it. Where the GTX platform serves Vaporesso's pod systems and lower-wattage devices, the GTi serves the full-power DTL end of the range, coils engineered for 30W to 90W output, high-VG e-liquids, and the kind of vapor density that UAE sub-ohm tank users specifically seek from their setup. 

Four resistance options cover every performance level from a restricted direct-lung entry point at 0.5Ω through to the flagship 0.15Ω at 75-90W where maximum cloud output is the objective. Stocked on Vape Dubai King in 5/pack with fast delivery across Dubai and all UAE emirates.

Richer Flavor and Bigger Clouds with Mesh Heating Element

The genuine Vaporesso GTi coils in Dubai use mesh heating elements rather than wire coils. The mesh lattice structure distributes heat across a wider surface area than a single wire, creating more simultaneous vaporization points in contact with the e-liquid per draw. For high-VG e-liquids this even heat distribution is particularly important because VG-heavy e-liquids vaporize less efficiently than PG-heavy formulas, and the mesh's broader surface compensates. 

The result is a draw that extracts flavor compounds more completely from the e-liquid, producing a richer, warmer, more saturated vapor than wire coils at equivalent resistance and wattage.

Features of Vaporesso GTi Replacement Coils

• 5 Coils Per Pack: Multiple weeks of regular DTL daily use

• Four Resistance Options: 0.15Ω, 0.2Ω, 0.4Ω, 0.5Ω, full DTL wattage spectrum

• High-Grade Mesh Heating: Even heat distribution, richer flavor, complete vaporization

• 0.15Ω Flagship: 75-90W, maximum cloud production in the GTi range

• 0.5Ω Restricted DTL Entry: 30-40W, accessible for vapers stepping into DTL from RDL

• 1-2 Week Coil Lifespan: 5-7 tank refills under regular daily DTL use

• Self-Circulating Airflow Compatibility: Works with iTank's circulation system

• Threaded Installation: Secure base-screw connection, no press-fit uncertainty

• High VG Optimized: 70%VG+ required for all variants, not for 50/50 or salt nic use

• Wide Vaporesso Compatibility: iTank series, Armour series, GEN series, Target series

• Not GTX: Different platform, confirm device before ordering

• Genuine Vaporesso: Original manufacturer coils, accurate resistance and wattage specs

Vaporesso GTi Coils: Buy the Right Variant

GTi Coils Compatible Devices

• Vaporesso iTank

• Vaporesso iTank 2

• Vaporesso iTank T

• Vaporesso Armour S Kit

• Vaporesso Armour Max Kit

• Vaporesso Armour Ultra Kit

• Vaporesso GEN 80S Kit

• Vaporesso GEN 200 Kit

• Vaporesso GEN Max Kit

• Vaporesso GEN SE Kit

• Vaporesso Target 80 Kit

• Vaporesso Target 100 Kit

• Vaporesso Target 200 Kit

When to Replace GTi Vaporesso Coils

GTi coils are rated for approximately 1-2 weeks of regular daily use or 5-7 full iTank refills at 60W+ before noticeable degradation. Replace when:

• Flavor becomes muted or flat despite a full tank of fresh e-liquid

• A slightly burnt or roasted character develops at normal wattage

• Vapor production decreases noticeably at the same wattage setting

• Gurgling or spitting occurs consistently (may indicate coil flooding, also check wicking)

• After 5-7 complete tank refills under regular daily use

Heavy DTL vapers running the 0.15Ω at 85W+ will approach the lower end of the lifespan range. Moderate users running 0.4Ω at 50-55W may reach 2 weeks before replacement.

How to Install and Prime GTi Coils

1. Unscrew the base section of the iTank from the glass/tank body

2. Unscrew the old coil counter-clockwise from the base and discard

3. Add 4-5 drops of e-liquid into the coil's wicking ports on the new coil

4. Let the cotton saturate for 3 minutes before proceeding

5. Thread the new coil clockwise into the base until hand-tight, do not overtighten

6. Fill the iTank with high-VG e-liquid (70%VG or higher strongly recommended)

7. Wait a further 8-10 minutes after filling for complete cotton saturation

8. Start vaping at the lowest recommended wattage for your coil variant

9. Take 3-4 short primer puffs before increasing to your preferred wattage

10. Increase wattage gradually over the first session rather than jumping to maximum immediately

Keep Running you iTank at its Best, Buy Online in UAE

Ready to restore peak performance to your Vaporesso device? The original Vaporesso GTi coil series is purpose-built for the iTank platform and compatible with the Armour, GEN, and Target kit ranges, offering four mesh coil options to cover everything from a smooth 30W DTL vape to powerful 90W cloud production. Order 5-pack Vaporesso GTi replacement coils today from Vape Dubai King for best DTL performance, competitive prices, and fast delivery anywhere in the UAE.

Frequently Asked Questions

Can I use GTi coils in my LUXE XR Max or Target PM80?

No, the LUXE XR Max and Target PM80 use GTX coils, which are a completely separate platform from GTi. GTi coils physically will not seat correctly in GTX-compatible devices.

What is the best GTi resistance for everyday DTL vaping?

The 0.2Ω (60-75W) is the most popular balanced option; dense clouds, rich flavor, and a wattage range that most dual-battery and high-capacity single-battery mods operate at comfortably. The 0.15Ω is for committed cloud chasers running 80W+.

What e-liquid should I use with GTi coils?

High-VG e-liquid at 70%VG or above is required for all GTi variants. The thick viscosity of high-VG e-liquid wicks efficiently through the mesh at high wattages. Standard 50/50 e-liquid is too thin and may cause leaking or poor flavor in the iTank architecture.

How long do GTi coils last?

Approximately 1-2 weeks of regular daily DTL use, or 5-7 full iTank refills at 60W+. Heavy users running 85W+ may replace weekly; lighter users at lower wattages may reach 2 weeks.

Where can I buy Vaporesso GTi Coils near me in Ajman?

You can buy online on Vape Dubai King with fast same-day and next-day delivery across Dubai, Abu Dhabi, Sharjah, Ajman, Fujairah, Al Ain, and all UAE emirates. All GTi mesh coil resistances are available, making it easy to choose the right option for your preferred wattage.