VooPoo Tpp Replacement Coils 3Pc/Pack

3 Per Pack VOOPOO TPP Replacement Coils in Dubai, UAE: High-Performance Sub-Ohm Mesh Coils for High-Wattage Devices

VOOPOO's TPP coil series is built as a direct successor to the PnP coil platform, using the same press-fit convenience and broad device compatibility, but upgrading the internal coil technology with patented atomization engineering that VOOPOO claims produces better flavor and denser clouds than PnP coils at comparable resistance. Four variants cover the full range from 32W restricted sub-ohm through to 100W maximum DTL output, giving Drag 3 and Drag X Plus users precise coil selection for their preferred vaping wattage. Available in 3/pack at Vape Dubai King with fast delivery across Dubai, Abu Dhabi, Sharjah, and the entire UAE.

The Patented Atomization Technology for Dense Clouds

VOOPOO's patented TPP coil technology improves upon traditional mesh coil designs by increasing the atomization surface area and accelerating heat transfer. The result is denser vapor production, richer flavor delivery, and a faster coil response with every draw. Compared to standard PnP coils, TPP coils provide a smoother, more consistent vaping experience with enhanced performance across the entire pod lifespan.

All Four VOOPOO TPP Coil Variants: Choose Yours 

• TPP-DM1, 0.15Ω Mesh, 60-80W:

The most widely used TPP coil in the UAE market. At 65-75W, the DM1 produces the characteristic warm, dense, flavor-saturated DTL draw that VOOPOO's Drag platform is designed for. Not as intense as the DM3 but significantly more sustainable for all-day use, the 60-80W range is accessible to most dual or single high-capacity battery mod setups. 

Best with 70/30 VG/PG freebase at 3-6mg. The recommended starting point for vapers new to the TPP platform.

• TPP-DM2, 0.2Ω Mesh, 40-60W:

The most battery-efficient TPP coil, operating at 40-60W, the DM2 is the best option for single-battery mods where extended runtime is a priority. Produces a slightly cooler, more moderate DTL draw than the DM1 at equivalent settings, less cloud-forward, more flavor-focused. Also the best coil for vapers stepping up from pod systems who want DTL performance without immediately jumping to 70W+ operation. 

Works well with 65/35 or 70/30 VG/PG freebase at 3-6mg.

• TPP-DM3, 0.15Ω Mesh, 80-100W:

The highest-wattage coil in the TPP range, same resistance as the DM1 but specifically engineered to operate at 80-100W for maximum cloud output and the most intense DTL experience the platform provides. Requires a dual-battery high-output mod (Drag 3 at full power, GeekVape Aegis, etc.) capable of stable sustained output at 85-95W. Not recommended for single-battery mods. 

Best with 70/30 VG/PG freebase at 3mg or below.

• TPP-DM4, 0.3Ω Mesh, 32-40W:

The most accessible coil in the TPP range, at 32-40W, the DM4 operates well within the range of most single-battery regulated mods and produces a warm, slightly restricted draw that sits between a full DTL and an open RDL. Ideal for vapers stepping into sub-ohm vaping from pod systems who want to ease into the TPP platform rather than jumping immediately to 60W+ operation. Also the best TPP coil for vapers who prefer a more restrained sub-ohm draw with slightly less cloud intensity. 

Works with 50/50 or 65/35 VG/PG freebase at 6mg or below.

Key Specs At A Glance

TPP Coil vs PnP Coil: Which Does Your Device Use?

Both the TPP and PnP coil series are press-fit, but they are not interchangeable, the coil body dimensions are different. Always verify which coil series your VOOPOO device requires before purchasing:

• Use TPP Coils with: Drag 3, Drag X Plus, Drag X Plus Pro, Argus GT 2, TPP Pod Tank, TPP-X Pod Tank
• Use PnP Coils with: Drag X, Drag S, Drag X Pro, Drag S Pro, Argus series (most variants), ITO Pod, Drag Q, VMATE series, Doric series

How to Install a TPP Coil

1. Remove the TPP pod from your device
2. Pull the spent coil straight out from the bottom of the pod, pull firmly until it releases from the press-fit connection
3. Prime the new coil by adding 5-7 drops of e-liquid directly to the mesh surface through the coil opening
4. Push the new coil firmly into the pod base until it clicks into press-fit position
5. Fill the pod with 70/30 VG/PG freebase via the fill port and allow 10 minutes to saturate
6. Reattach the pod to the device and begin vaping at the lower end of the coil's wattage range, increasing gradually

Ready to Get the Best Sub-Ohm Experience?

3 coils per pack. Four variants covering 32W to 100W DTL output. VOOPOO's patented atomization technology for enhanced flavor and cloud density. Press-fit installation. Compatible with Drag 3, Drag X Plus, Argus GT 2, and the full TPP tank platform. Purchase your VOOPOO TPP replacement coil variant from Vape Dubai King and get the best from your high-wattage sub-ohm device.

FAQs

What is the difference between the TPP-DM1 and TPP-DM3?

Both are 0.15Ω but engineered for different wattage ranges. The DM1 operates at 60-80W for standard high-power DTL use accessible to most high-wattage mods. The DM3 operates at 80-100W specifically for maximum cloud output, it requires a device capable of stable sustained output above 80W.

Are TPP coils compatible with PnP pods and tanks?

No, TPP and PnP coils are not interchangeable despite both using press-fit installation. The coil body dimensions are different. Check your device's compatibility before purchasing.

Which TPP coil should I start with?

The TPP-DM1 (0.15Ω, 60-80W) is the most widely recommended starting point, it covers the most popular DTL wattage range and is the best-reviewed coil in the TPP series. The DM2 is the better choice if your mod operates most comfortably at 40-60W.

What e-liquid is best with TPP coils?

70/30 VG/PG freebase at 3-6mg nicotine is best for all variants. It is not recommended to use salt nicotine e-liquids at high concentrations with low resistance TPP coils.

How long do TPP coils last?

With correct priming and use within the rated wattage range, TPP coils typically last 1-2 weeks for moderate daily DTL vapers. Using non-sweetened freebase e-liquids significantly extends coil life compared to sweetener-heavy alternatives.