Buy Uwell Aeglos Replacement Coils: Pro-FOCS Flavor Technology with DL & MTL Coil Variants
The Uwell Aeglos coils platform is built to demonstrate that a pod mod device can deliver both DL cloud performance and MTL flavor precision within the same coil system. The 0.23Ω UN2 Mesh-H does exactly what high-wattage DL vapers expect, dense vapor at 40-45W with the even, rapid heat distribution of a full mesh surface. The 0.8Ω regular coil does exactly what salt nic MTL users need, a tight, flavorful draw at 20-23W that keeps nicotine delivery controlled and consistent across extended sessions.
Both coils carry Uwell's Pro-FOCS flavor technology and a curved, perforated mesh construction that extracts flavor more completely than flat wire designs. Sold in four per pack at Vape Dubai King with fast delivery across the UAE.
The Two Technologies That Define These Coils in UAE
Pro-FOCS (Professional Flavor Optimization Coil System) recycles airflow through the atomizer core to pick up additional condensed flavor compounds before the vapor reaches the mouthpiece. The result is a draw that tastes richer and more saturated.
Curved and perforated wire mesh is the heating element design used across both Aeglos variants. Rather than a flat mesh sheet, the curved geometry creates a three-dimensional contact surface between the heating element and the e-liquid; more simultaneous vaporization points, more complete extraction of flavor compounds, and more even temperature distribution that prevents the hot spots.
Core Features
- 4 Coils Per Pack: Weeks of regular use depending on wattage and vaping frequency
- Two Variants: 0.23Ω DL Mesh at 40-45W and 0.8Ω MTL at 20-23W
- Pro-FOCS Flavor Technology: Recycled airflow extraction, richer, more saturated flavor
- Curved Perforated Wire Mesh: 3D contact surface, complete vaporization from multiple directions
- Press-Fit Installation: Tool-free coil swap, align and press, ready to vape
- Compatible with Aeglos Kit and Aeglos H2: Confirmed cross-compatibility across both devices
- Genuine Uwell: Original manufacturer coils, Pro-FOCS specifications and mesh quality verified
Aeglos Coils Variants
| Feature | UN2 Mesh-H 0.23Ω | Regular 0.8Ω |
| Resistance | 0.23Ω | 0.8Ω |
| Wattage | 40-45W | 20-23W |
| Draw style | Direct to Lung (DL) | Mouth to Lung (MTL) |
| Coil construction | UN2 Meshed-H, curved perforated mesh | Regular, curved perforated mesh |
| E-liquid recommendation | High VG freebase ≤12mg | 50/50, salt nic 20-50mg |
| Vapor output | Dense, cloud-forward | Low, concentrated and discreet |
| Throat hit | Smooth and warm | Firm and direct |
| Pro-FOCS technology | Yes | Yes |
| Installation | Press-fit | Press-fit |
Choosing Between the Two Variants
The choice between the 0.23Ω and 0.8Ω Aeglos coil is a simple decision based on your vaping style:
Choose the 0.23Ω UN2 Mesh-H if:
- You run the Aeglos at 40W+ and prefer a full, open DL draw
- You use high-VG freebase e-liquid at 3-12mg nicotine
- You want dense cloud production and warm vapor on every draw
- Your device regularly operates in the 40-45W range
Choose the 0.8Ω Regular if:
- You use salt nicotine e-liquid at 20-50mg
- You prefer a tight, cigarette-like MTL draw
- You want discreet vapor production with concentrated flavor
- Your device is being run at the 20-23W MTL range
Device Compatibility
- Uwell Aeglos Kit 60W
- Uwell Aeglos H2
Important: The Aeglos P1 Kit uses separate Aeglos P1 UN2 Meshed-H coils in 0.2Ω and 0.6Ω variants, these are different from the standard Aeglos coils above. Confirm your device is the standard Aeglos or Aeglos H2 before ordering.
How to Prime and Install Aeglos Coils
- Remove the pod from the Aeglos device
- Pull the old coil straight out of the pod base
- Add 3-5 drops of e-liquid onto the new coil's wicking ports, more for the 0.23Ω mesh due to larger cotton volume
- Press the coil firmly into the pod base until it clicks into position
- Fill the pod with your preferred e-liquid
- Wait 5-8 minutes for full coil saturation before vaping
- For the 0.23Ω, start at 40W and adjust within the 40-45W range
- For the 0.8Ω, start at 20W and adjust within the 20-23W range
The Aeglos Replacement Coils for Every Draw Style
The Uwell Aeglos Replacement Coil range covers both ends of the vaping spectrum, sub-ohm DL mesh at 40-45W for cloud vapers, tight MTL at 20-23W for salt nic users with Pro-FOCS flavor technology and curved perforated mesh construction ensuring the best possible draw from every coil in every pack. Order yours today on Vape Dubai King with fast delivery anywhere across the UAE.
Frequently Asked Questions
How many coils come in each Aeglos coil pack?
Four Uwell Aeglos replacement coils per pack. Each coil is individually sealed to maintain freshness and prevent contamination before use.
What is the difference between the 0.23Ω and 0.8Ω Aeglos coils?
The 0.23Ω UN2 Mesh-H is a sub-ohm DL coil for high-VG freebase at 40-45W; dense vapor, open draw, low nicotine. The 0.8Ω is an MTL coil for salt nicotine at 20-23W; tight draw, concentrated flavor, high nicotine compatible.
Are Aeglos coils compatible with the Aeglos P1?
The Aeglos P1 uses its own coil variants (0.2Ω and 0.6Ω Aeglos P1 UN2 Meshed-H), different from the standard Aeglos coils. Confirm your device model before ordering. Using the wrong coil type may result in improper fitting or reduced performance.
What e-liquid should I use with the 0.23Ω Aeglos coil?
High-VG freebase e-liquid (60-70%VG) at 3-12mg nicotine. Salt nicotine is not recommended in sub-ohm coils at high wattage. This setup is ideal for direct-lung vaping and larger cloud production.
What e-liquid works best with the 0.8Ω Aeglos coil?
Salt nicotine e-liquids at 20-50mg in a 50/50 VG/PG ratio. The 0.8Ω at 20-23W is specifically optimized for this format. It delivers a smooth mouth-to-lung experience with strong nicotine satisfaction and excellent flavor.
